R3303-HP HSR6800 Routers Layer 3 - IP Routing Command Reference

148
<sysname> display isis interface statistics
Interface Statistics information for ISIS(1)
--------------------------------------------
Type IPv4 Up/Down IPv6 Up/Down
LAN 0/1 -/-
P2P 4/0 -/-
Table 32 Command output
Field Descri
p
tion
Type
Network type of the interface:
• LAN for broadcast network.
• P2P for point-to-point network.
IPv4 UP Number of IS-IS interfaces in up state.
IPv4 DOWN Number of IS-IS interfaces in down state.
IPv6 UP
Number of IS-ISv6 interfaces in up state. If IPv6 is not
enabled, this field displays a hyphen (-).
IPv6 DOWN
Number of IS-ISv6 interfaces in down state. If IPv6 is not
enabled, this field displays a hyphen (-).
display isis lsdb
Use display isis lsdb to display IS-IS link state database.
Syntax
display isis lsdb [ [ l1 | l2 | level-1 | level-2 ] | [ lsp-id lspid | lsp-name lspname ] | local | verbose ]
* [ process-id | vpn-instance vpn-instance-name ] [ | { begin | exclude | include } regular-expression ]
Views
Any view
Default command level
1: Monitor level
Parameters
l1, level-1: Displays the level-1 LSDB.
l2, level-2: Displays the level-2 LSDB.
lspid: LSP ID, in the form of sysID.Pseudo ID-fragment num, where sysID represents the originating node
or pseudo node, and Pseudo ID is separated by a dot from sysID and by a hyphen from fragment num.
lspname: LSP name, in the form of Symbolic name.Pseudo ID-fragment num, where Pseudo ID is
separated by a dot from Symbolic name and by a hyphen from fragment num. If the Pseudo ID is 0,
specify the LSP name in the form Symbolic name-fragment num.
local: Displays LSP information generated locally.
verbose: Displays LSDB detailed information.
process-id: Displays the LSDB of the IS-IS process. The ID is in the range of 1 to 65535.