R3303-HP HSR6800 Routers Layer 3 - IP Routing Command Reference

156
Field Descri
p
tion
HoldTime
Holdtime.
Within the holdtime if no hellos are received from the neighbor, the neighbor
is considered down. If a hello is received, the holdtime is reset to the initial
value.
Type
Circuit type:
• L1—The circuit type is Level-1 and the neighbor is a Level-1 router.
• L2—The circuit type is Level-2 and the neighbor is a Level-2 router.
• L1(L1L2)—The circuit type is Level-1 and the neighbor is a Level-1-2 router.
• L2(L1L2)—The circuit type is Level-2 and the neighbor is a Level-1-2 router.
PRI DIS priority of the neighbor.
Area Address(es) The neighbor's area address.
Peer IP Address(es) IP address of the neighbor.
Uptime Time that elapsed after the neighbor relationship was formed.
Adj Protocol Adjacency protocol.
Local Topology Topology number supported by the local end.
Peer Topology Topology number supported by the peer end.
LDP-sync Adjacency state
LDP adjacency status:
• Unknown—The interface has no LDP adjacencies.
• Up—The LDP session to the neighbor has converged.
• Down—The LDP adjacency to the neighbor is down.
# Display IS-IS neighbor statistics.
<Sysname> display isis peer statistics
Peer Statistics information for ISIS(1)
---------------------------------------
Type IPv4 Up/Init IPv6 Up/Init
LAN Level-1 0/0 0/0
LAN Level-2 0/0 0/0
P2P 3/0 0/0
Table 37 Command output
Field Descri
p
tion
Type
Neighbor type:
• LAN Level-1—Number of Level-1 neighbors whose network type is broadcast.
• LAN Level-2—Number of Level-2 neighbors whose network type is broadcast.
• P2P—Number of neighbors whose network type is P2P.
IPv4 Up Number of IPv4 neighbors in up state.
IPv4 Init Number of IPv4 neighbors in init state.
IPv6 Up Number of IPv6 neighbors in up state.
IPv6 Init Number of IPv6 neighbors in init state.