R3303-HP HSR6800 Routers Layer 3 - IP Routing Command Reference

161
Field Descri
p
tion
Src Count Count of advertising sources.
Flag
Route state flag:
• R—The route has been installed into the routing table.
• L—The route has been flooded in an LSP.
• U—Route leaking flag. If it is UP, routes from L2 to L1 cannot be
advertised back to L2.
Next Hop Next hop.
Interface Outgoing interface.
ExitIndex Index of the outgoing interface.
display isis spf-log
Use display isis spf-log to display IS-IS SPF log information.
Syntax
display isis spf-log [ process-id | vpn-instance vpn-instance-name ] [ | { begin | exclude | include }
regular-expression ]
Views
Any view
Default command level
1: Monitor level
Parameters
process-id: Displays IS-IS SPF log information for the IS-IS process. The ID is in the range of 1 to 65535.
vpn-instance vpn-instance-name: Displays IS-IS SPF log information for the MPLS L3VPN.
vpn-instance-name is a case-sensitive string of 1 to 31 characters. If no VPN is specified, the IS-IS SPF log
information for the public network is displayed.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Examples
# Display IS-IS SPF log information.
<Sysname> display isis spf-log
SPF Log information for ISIS(1)
-------------------------------
Level Trig.Event No.Nodes Duration StartTime
L2 IS_SPFTRIG_PERIODIC 2 0 13:3:24
L1 IS_SPFTRIG_PERIODIC 2 0 13:18:8