R3303-HP HSR6800 Routers Layer 3 - IP Routing Command Reference

175
Related commands
import-route
import-route limit (IS-IS view)
Use import-route limit to configure the maximum number of redistributed Level 1/Level 2 IPv4 routes.
Use undo import-route limit to restore the default.
Syntax
import-route limit number
undo import-route limit
Default
The maximum number of redistributed Level 1/Level 2 IPv4 routes is 500000.
Views
IS-IS view
Default command level
2: System level
Parameters
number: Specifies the maximum number of redistributed Level 1/Level 2 IPv4 routes, in the range of 1 to
500000.
Examples
# Configure IS-IS process 1 to redistribute up to 1000 Level 1/Level 2 IPv4 routes.
<Sysname> system-view
[Sysname] isis 1
[Sysname-isis-1] import-route limit 1000
isis
Use isis to enable an IS-IS process and specify an associated VPN instance, enter IS-IS view, or both.
Use undo isis to disable an IS-IS process.
Syntax
isis [ process-id ] [ vpn-instance vpn-instance-name ]
undo isis [ process-id ]
Views
System view
Default command level
2: System level
Parameters
process-id: Specifies an IS-IS process by its ID in the range of 1 to 65535. The default is 1.