R3303-HP HSR6800 Routers Layer 3 - IP Routing Command Reference

186
[Sysname-GigabitEthernet4/0/1] isis silent
isis small-hello
NOTE:
This command is not available in loopback interface view.
Use isis small-hello to configure the interface to send small hello packets without CLVs.
Use undo isis small-hello to restore the default.
Syntax
isis small-hello
undo isis small-hello
Default
An interface sends standard hello packets.
Views
Interface view
Default command level
2: System level
Examples
# Configure the GigabitEthernet 4/0/1 interface to send small Hello packets.
<Sysname> system-view
[Sysname] interface GigabitEthernet 4/0/1
[Sysname-GigabitEthernet4/0/1] isis small-hello
isis timer csnp
NOTE:
This command is not supported in loopback interface view.
Use isis timer csnp to specify on the DIS of a broadcast network the interval for sending CSNP packets.
Use undo isis timer csnp to restore the default.
Syntax
isis timer csnp seconds [ level-1 | level-2 ]
undo isis timer csnp [ seconds ] [ level-1 | level-2 ]
Default
The default CSNP interval is 10 seconds.
Views
Interface view