R3303-HP HSR6800 Routers Layer 3 - IP Routing Command Reference

196
maximum load-balancing (IS-IS view)
Use maximum load-balancing to configure the maximum number of equal-cost multi-path (ECMP) routes
for load balancing.
Use undo maximum load-balancing to restore the default.
Syntax
[ ipv4-unicast topology-name ] maximum load-balancing number
undo [ ipv4-unicast topology-name ] maximum load-balancing
Default
The maximum number of ECMP routes is 8.
Views
IS-IS view
Default command level
2: System level
Parameters
ipv4-unicast topology-name: Specifies an IPv4 unicast topology. topology-name is a string of 1 to 31
characters.
number: Specifies the maximum number of ECMP routes, in the range of 1 to 8.
Usage guidelines
If no topology is specified, the command configures the maximum number of ECMP routes for the base
topology.
Examples
# Configure the maximum number of ECMP routes as 2.
<Sysname> system-view
[Sysname] isis 100
[Sysname-isis-100] maximum load-balancing 2
multiple-topology ipv4 unicast
Use multiple-topology ipv4-unicast to enable an IPv4 unicast topology in the IS-IS process.
Use undo multiple-topology ipv4-unicast to cancel the configuration.
Syntax
multiple-topology ipv4-unicast topology-name topology-number
undo multiple-topology ipv4-unicast topology-name
Default
IS-IS does not support IPv4 unicast MTR.
Views
IS-IS view