R3303-HP HSR6800 Routers Layer 3 - IP Routing Command Reference

198
For example, a NET is ab.cdef.1234.5678.9abc.00, where area ID is ab.cdef, system ID is
1234.5678.9abc, and SEL is 00.
Examples
# Specify the NET as 10.0001.1010.1020.1030.00, of which 10.0001 is the area ID and
1010.1020.1030 is the system ID.
<Sysname> system-view
[Sysname] isis 1
[Sysname-isis-1] network-entity 10.0001.1010.1020.1030.00
Related commands
• isis
• isis enable
non-stop-routing
Use non-stop-routing to enable IS-IS NSR.
Use undo non-stop-routing to disable IS-IS NSR.
Syntax
non-stop-routing
undo non-stop-routing
Default
IS-IS NSR is disabled.
Views
IS-IS view
Default command level
2: System level
Usage guidelines
The IS-IS GR and IS-IS NSR features are mutual exclusive. Do not configure the non-stop-routing and
graceful-restart commands at the same time.
Examples
# Enable NSR for IS-IS process 1.
<Sysname> system-view
[Sysname] isis 1
[Sysname-isis-1] non-stop-routing
non-stop-routing interval
Use non-stop-routing interval to set the NSR interval.
Use undo non-stop-routing interval to restore the default.
Syntax
non-stop-routing interval interval-value