R3303-HP HSR6800 Routers Layer 3 - IP Routing Command Reference

201
Syntax
reset isis all [ process-id | vpn-instance vpn-instance-name ]
Default
No data structure information is cleared.
Views
User view
Default command level
2: System level
Parameters
process-id: Clears the data structure information of an IS-IS process numbered from 1 to 65535.
vpn-instance vpn-instance-name: Clears the data structure information of the MPLS L3VPN.
vpn-instance-name is a case-sensitive string of 1 to 31 characters. If no VPN is specified, the data
structure information of the public network is cleared.
Usage guidelines
Use this command when the LSP needs to be updated immediately. For example, after executing the
area-authentication-mode and domain-authentication-mode commands, use the reset isis all command
to clear old LSPs.
Examples
# Clear all IS-IS data structure information.
<Sysname> reset isis all
Related commands
• area-authentication-mode
• domain authentication-mode
reset isis peer
Use reset isis peer to clear the data structure information of a specified IS-IS neighbor.
Syntax
reset isis peer system-id [ process-id | vpn-instance vpn-instance-name ]
Views
User view
Default command level
2: System level
Parameters
system-id: Specifies the system ID of an IS-IS neighbor.
process-id: Clears the data structure information of an IS-IS process with an ID from 1 to 65535.
vpn-instance vpn-instance-name: Clears the data structure information of the MPLS L3VPN.
vpn-instance-name is a case-sensitive string of 1 to 31 characters. If no VPN is specified, the data
structure information of the public network is cleared.