R3303-HP HSR6800 Routers Layer 3 - IP Routing Command Reference

8
Destination: 10.1.3.0/24
Protocol: Direct Process ID: 0
Preference: 0 Cost: 0
IpPrecedence: QosLcId:
NextHop: 10.1.3.1 Interface: Ethernet1/1
BkNextHop: 0.0.0.0 BkInterface:
RelyNextHop: 0.0.0.0 Neighbor: 0.0.0.0
Tunnel ID: 0x0 Label: NULL
BKTunnel ID: 0x0 BKLabel: NULL
State: Active Adv Age: 1d00h05m31s
Tag: 0
Destination: 10.1.3.1/32
Protocol: Direct Process ID: 0
Preference: 0 Cost: 0
IpPrecedence: QosLcId:
NextHop: 127.0.0.1 Interface: InLoopBack0
BkNextHop: 0.0.0.0 BkInterface:
RelyNextHop: 0.0.0.0 Neighbor: 0.0.0.0
Tunnel ID: 0x0 Label: NULL
BKTunnel ID: 0x0 BKLabel: NULL
State: Active NoAdv Age: 1d00h05m32s
Tag: 0
For command output, see Table 2.
display ip routing-table ip-address
Use display ip routing-table ip-address to display information about the route to the specified destination
address.
Use display ip routing-table ip-address1 { mask-length | mask } ip-address2 { mask-length | mask } to
display information about active routes whose destinations and masks fall into the specified address
range.
Syntax
display ip routing-table [ multiple-topology topology-name | vpn-instance vpn-instance-name ]
ip-address [ mask | mask-length ] [ longer-match ] [ verbose ] [ | { begin | exclude | include }
regular-expression ]
display ip routing-table [ multiple-topology topology-name | vpn-instance vpn-instance-name ]
ip-address1 { mask | mask-length } ip-address2 { mask | mask-length } [ verbose ] [ | { begin | exclude
| include } regular-expression ]
Views
Any view
Default command level
1: Monitor level