R3303-HP HSR6800 Routers Layer 3 - IP Routing Command Reference

223
<Sysname> display bgp group aaa
BGP peer-group is aaa
Remote AS 200
Type : external
Maximum allowed prefix number: 4294967295
Threshold: 75%
Configured hold timer value: 180
Keepalive timer value: 60
Minimum time between advertisement runs is 30 seconds
Peer Preferred Value: 0
No routing policy is configured
Members (* - Dynamically created peer):
Peer AS MsgRcvd MsgSent OutQ PrefRcv Up/Down State
2.2.2.1 200 0 0 0 0 00:00:35 Active
*10.1.1.1 200 0 0 0 0 00:00:50 Established
Table 43 Command output
Field Description
BGP peer-group Name of the BGP peer group.
Remote AS AS number of peer group.
type
Type of the BGP peer group:
• IBGP.
• EBGP.
Maximum allowed prefix number
Maximum prefixes allowed to receive from the peer
group.
Threshold
Percentage of received prefixes from the peer group to
maximum prefixes allowed to receive from the peer
group. If the percentage is reached, the system
generates alarm messages.
Configured hold timer value Holdtime interval.
Keepalive timer value Keepalive interval.
Minimum time between advertisement runs Minimum interval for route advertisements.
Peer Preferred Value Preferred value specified for the routes from the peer.
Members(* - Dynamically created peer)
Detailed information about the members in the peer
group. An asterisk (*) before a peer indicates that the
peer is a dynamically created peer.
Peer IPv4 address of the peer.
AS AS number of the peer.
MsgRcvd Number of messages received.
MsgSent Number of messages sent.
OutQ Number of messages to be sent.