R3303-HP HSR6800 Routers Layer 3 - IP Routing Command Reference

225
Field Description
Route-policy Routing policy.
Short-cut Short-cut route.
display bgp non-stop-routing
Use display bgp non-stop-routing to display the running status of BGP NSR.
Syntax
display bgp non-stop-routing [ | { begin | exclude | include } regular-expression ]
Views
Any view
Default command level
1: Monitor level
Parameters
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Examples
# Display the running status of BGP NSR.
<Sysname> display bgp non-stop-routing
BGP NSR status: Ready.
Table 45 Command output
Field Description
BGP NSR status
BGP NSR backup status:
• Ready—BGP NSR completes IPv4 routing and neighbor information backup, and enters
the Ready state. If an active/standby switchover occurs, the existing routes are still
effective, and the current services are not affected.
• Not ready—BGP NSR is backing up IPv4 routing and neighbor information in batches,
and does not function. If an active/standby switchover occurs, the current services are
interrupted, and neighbor relationships are reestablished.
display bgp paths
Use display bgp paths to display information about BGP AS paths.
Syntax
display bgp paths [ as-regular-expression | | { begin | exclude | include } regular-expression ]