R3303-HP HSR6800 Routers Layer 3 - IP Routing Command Reference

232
Table 50 Command output
Field Description
Total Number of
Routes
Total Number of Routes.
BGP Local router
ID
BGP local router ID.
Status codes
Status codes:
• * – valid—Valid route.
• ^ - VPNv4 best—Best VPNv4 route.
• > – best—Best route.
• d – damped—Dampened route.
• h – history—History route.
• i – internal—Internal route.
• s – suppressed—Suppressed route.
• S – Stale—Stale route.
Origin
Origin attributes:
• i – IGP—Originated in the AS.
• e – EGP—Learned through EGP.
• ? – incomplete—Learned by some other means.
Network Destination network address.
Next Hop Next hop IP address.
MED Multi-Exit Discriminator attribute.
LocPrf Local preference value.
PrefVal Preferred value of the route.
Path AS_PATH attribute, recording the ASs the packet has passed to avoid routing loops.
PrefVal Preferred value.
Ogn
Origin attribute of the route:
• i—The route is interior to the AS. Summary routes and the routes injected with the
network command are considered IGP routes.
• e—The route is learned from the Exterior Gateway Protocol (EGP).
• ?—Short for INCOMPLETE. It indicates that the origin of the route is unknown and the
route is learned by other means.
display bgp routing-table as-path-acl
Use display bgp routing-table as-path-acl to display BGP routes permitted by an as-path ACL.
Syntax
display bgp routing-table as-path-acl as-path-acl-number [ | { begin | exclude | include }
regular-expression ]
Views
Any view