R3303-HP HSR6800 Routers Layer 3 - IP Routing Command Reference

274
Parameters
group-name: Specifies the name of a peer group, a string of 1 to 47 characters.
ip-address: Specifies the IP address of a peer.
Examples
# I n B G P v i e w, s a ve ro u t i n g i n f o r m a t io n f ro m p e e r 131.10 0 .1.1.
<Sysname> system-view
[Sysname] bgp 100
[Sysname-bgp] peer 131.100.1.1 as-number 200
[Sysname-bgp] peer 131.100.1.1 keep-all-routes
# I n B G P- V P N i n s t a n c e vi ew, s a v e ro u t i n g i n f o rm a t i o n f r o m p e e r 131.10 0 .1.1. ( T h e V P N h a s b e e n c r e a t e d . )
<Sysname> system-view
[Sysname] bgp 100
[Sysname-bgp] ipv4-family vpn-instance vpn1
[Sysname-bgp-ipv4-vpn1] peer 131.100.1.1 as-number 200
[Sysname-bgp-ipv4-vpn1] peer 131.100.1.1 keep-all-routes
peer log-change (BGP/BGP-VPN instance view)
Use peer log-change to enable the logging of session state and event information for a specified peer or
peer group.
Use undo peer log-change to remove the configuration.
Syntax
peer { group-name | ip-address } log-change
undo peer { group-name | ip-address } log-change
Default
The logging is enabled.
Views
BGP view, BGP-VPN instance view
Default command level
2: System level
Parameters
group-name: Specifies the name of a peer group, a string of 1 to 47 characters.
ip-address: Specifies the IP address of a peer.
Examples
# In BGP view, enable the logging of session state and event information for peer group test.
<Sysname> system-view
[Sysname] bgp 100
[Sysname-bgp] peer test log-change
# In BGP-VPN instance view, enable the logging of session state and event information for peer group
test. (The VPN has been created.)
<Sysname> system-view