R3303-HP HSR6800 Routers Layer 3 - IP Routing Command Reference

16
The display ipv6 routing-table verbose command output shows the statistics of the entire routing table,
and the detailed information of each route.
Examples
# Display brief routing table information
<Sysname> display ipv6 routing-table
Routing Table : Public
Destinations : 1 Routes : 1
Destination: ::1/128 Protocol : Direct
NextHop : ::1 Preference: 0
Interface : InLoop0 Cost : 0
Table 4 Command output
Field Descri
p
tion
Destination IPv6 address of the destination network/host.
NextHop Next hop address.
Preference Route priority.
Interface Outgoing interface.
Protocol Routing protocol.
Cost Route cost.
# Display detailed routing table information.
<Sysname> display ipv6 routing-table verbose
Routing Table : Public
Destinations : 1 Routes : 1
Destination : ::1 PrefixLength : 128
NextHop : ::1 Preference : 0
IpPrecedence : QosLcId :
RelayNextHop : :: Tag : 0H
Neighbor : :: ProcessID : 0
Interface : InLoopBack0 Protocol : Direct
State : Active NoAdv Cost : 0
Tunnel ID : 0x0 Label : NULL
Age : 22161sec
Table 5 Command output
Field Descri
p
tion
Destination IPv6 address of the destination network/host.
PrefixLength Prefix length of the address.
NextHop Next hop.
Preference Route preference.
IpPrecedence IP precedence.
QosLcId QoS-local ID.