R3303-HP HSR6800 Routers Layer 3 - IP Routing Command Reference

305
if-match acl 3101
apply output-interface Serial2/2/0
# Display local PBR configuration.
<Sysname> display ip policy-based-route setup local
Local policy based routing configuration information:
policy-based-route: pr01
permit node 1:
if-match acl 3101
apply output-interface Serial2/2/0
Table 57 Command output
Field Description
policy Name Policy name.
interface
Interface where the policy is applied. Local means the
policy is applied locally.
Interface GigabitEthernet2/1/1 policy based routing
configuration information
PBR configuration on GigabitEthernet 2/1/1.
Local policy based routing configuration information Local PBR information.
policy-based-route Policy name.
permit node The match mode is permit.
if-match acl Match packets against ACL.
apply output-interface Specify the output interface.
display ip policy-based-route statistics
Use display ip policy-based-route statistics to display PBR statistics.
Syntax
In standalone mode:
display ip policy-based-route statistics { interface interface-type interface-number | local } [ slot
slot-number ] [ | { begin | exclude | include } regular-expression ]
In IRF mode:
display ip policy-based-route statistics { interface interface-type interface-number | local } [ chassis
chassis-number slot slot-number ] [ | { begin | exclude | include } regular-expression ]
Views
Any view
Default command level
1: Monitor level
Parameters
interface interface-type interface-number: Displays the PBR statistics on the specified interface.
local: Displays local PBR statistics.