R3303-HP HSR6800 Routers Layer 3 - IP Routing Command Reference

19
verbose: Displays detailed information about all routes. Without this keyword, only brief information
about active routes is displayed.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Usage guidelines
Executing the command with different parameters yields different output:
• display ipv6 routing-table ipv6-address
{ The system ANDs the input destination IPv6 address with the prefix length in each route entry.
{ The system ANDs the destination IPv6 address in each route entry with the prefix length in each
entry.
{ If the two operations yield the same result for an entry and this entry is active, it is displayed.
• display ipv6 routing-table ipv6-address prefix-length
{ The system ANDs the input destination IPv6 address with the input prefix length.
{ The system ANDs the destination IPv6 address in each route entry with the input prefix length.
{ If the two operations yield the same result for an entry and the entry is active with a prefix length
less than or equal to the input prefix length, the entry is displayed.
Only route entries that exactly match the input destination address and prefix length are displayed.
• display ipv6 routing-table ipv6-address longer-match
{ The system ANDs the input destination IPv6 address with the prefix length in each route entry.
{ The system ANDs the destination IPv6 address in each route entry with the prefix length in each
entry.
{ If the two operations yield the same result for multiple entries, the one that is active with the
longest prefix length is displayed.
• display ipv6 routing-table ipv6-address prefix-length longer-match
{ The system ANDs the input destination IPv6 address with the input prefix length.
{ The system ANDs the destination IPv6 address in each route entry with the input prefix length.
{ If the two operations yield the same result for multiple entries with a prefix length less than or
equal to the input prefix length, the one that is active with the longest prefix length is displayed.
Examples
# Display brief information about the routes with destination IPv6 address 10::1.
<Sysname> display ipv6 routing-table 10::1 127
Routing Table: Public
Summary Count: 3
Destination: 10::/64 Protocol : Static
NextHop : :: Preference: 60
Interface : NULL0 Cost : 0