R3303-HP HSR6800 Routers Layer 3 - IP Routing Command Reference

320
Table 62 Command output
Field Descri
p
tion
Interface-name Name of an interface running RIPng.
Link Local Address Link-local address of an interface running RIPng.
Split-horizon
Indicates whether the split horizon function is enabled:
• on—Enabled.
• off—Disabled.
Poison-reverse
Indicates whether the poison reverse function is
enabled:
• on—Enabled.
• off—Disabled.
MetricIn/MetricOut Additional metric to incoming and outgoing routes.
Default route
• Only/Originate—Only means that the interface
advertises only the default route. Originate means
that the default route and other RIPng routes are
advertised.
• Off—No default route is advertised or the
garbage-collect time expires after the default route
advertisement was disabled.
• In garbage-collect status—With default route
advertisement disabled, the interface advertises
the default route with metric 16 during the
garbage-collect time.
Summary address
Summarized IPv6 prefix and summary IPv6 prefix on
the interface.
IPsec policy name IPsec policy applied on the interface.
SPI SPI defined in the IPsec policy.
display ripng route
Use display ripng route to display all RIPng routes and timers associated with each route of a RIPng
process.
Syntax
display ripng process-id route [ | { begin | exclude | include } regular-expression ]
Views
Any view
Default command level
1: Monitor level
Parameters
process-id: Specifies a RIPng process by its ID in the range of 1 to 65535.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.