R3303-HP HSR6800 Routers Layer 3 - IP Routing Command Reference

326
Views
RIPng view
Default command level
2: System level
Parameters
number: Specifies the maximum number of ECMP routes, in the range of 1 to 8. The default is 8.
Usage guidelines
Configure the maximum number of ECMP routes according to the memory size.
Examples
# Set the maximum number of ECMP routes to 2.
<Sysname> system-view
[Sysname] ripng 100
[Sysname-ripng-100] maximum load-balancing 2
preference
Use preference to specify the preference for RIPng routes.
Use undo preference to restore the default.
Syntax
preference [ route-policy route-policy-name ] preference
undo preference [ route-policy ]
Default
The preference of RIPng routes is 100.
Views
RIPng view
Default command level
2: System level
Parameters
route-policy-name: Specifies a routing policy by its name, a case-sensitive string of 1 to 63 characters.
value: Specifies the preference for RIPng routes, in the range of 1 to 255.
Usage guidelines
You can specify a routing policy by using the keyword route-policy to set a preference for the matching
RIPng routes.
• The preference set by the routing policy applies to all matching RIPng routes. The preference of
other routes is set by the preference command.
• If no preference is set by the routing policy, the preference of all RIPng routes is set by the preference
command.
Examples
# Set the RIPng route preference to 120.