R3303-HP HSR6800 Routers Layer 3 - IP Routing Command Reference

331
undo ripng metricin
Default
The additional metric to received routes is 0.
Views
Interface view
Default command level
2: System level
Parameters
value: Adds an additional metric to received routes, in the range of 0 to 16.
Examples
# Specify the additional routing metric as 12 for RIPng routes received by GigabitEthernet2/1/1.
<Sysname> system-view
[Sysname] interface gigabitethernet 2/1/1
[Sysname-GigabitEthernet2/1/1] ripng metricin 12
Related commands
ripng metricout
ripng metricout
Use ripng metricout to configure an additional metric for RIPng routes advertised by an interface.
Use undo ripng metricout to restore the default.
Syntax
ripng metricout value
undo ripng metricout
Default
The default additional routing metric is 1.
Views
Interface view
Default command level
2: System level
Parameters
value: Adds an additional metric to advertised routes, in the range of 1 to 16.
Examples
# Set the additional metric to 12 for routes advertised by GigabitEthernet 2/1/1.
<Sysname> system-view
[Sysname] interface gigabitethernet 2/1/1
[Sysname-GigabitEthernet2/1/1] ripng metricout 12
Related commands
ripng metricin