R3303-HP HSR6800 Routers Layer 3 - IP Routing Command Reference

341
Field Descri
p
tion
Hold time between SPFs Hold time between SPF calculations.
Minimum LSA interval Minimum interval for generating LSAs.
Minimum LSA arrival Minimum LSA repeat arrival interval.
Number of external LSA Number of ASE LSAs.
These external LSAs' checksum Sum Sum of all the ASE LSAs' checksum.
Number of AS-Scoped Unknown LSA Number of LSAs with unknown flooding scope.
Number of LSA originated Number of LSAs originated.
Number of LSA received Number of LSAs received.
Number of areas in this router Number of areas this router is attached to.
Area Area ID.
Number of interfaces in this area Number of interfaces attached to this area.
SPF algorithm executed 1 times SPF algorithm is executed 1 time.
Translator state
State of the translator that translates
NSSA-external-LSAs to AS-external-LSAs:
• Enabled—The translator is specified through
commands.
• Elected—The translator is designated through
election.
Disabled—The device is not a translator.
Translate stability timer interval
Stability interval for
NSSA-external-LSA-to-AS-external-LSA translation.
Number of LSA Number of LSAs.
These LSAs' checksum Sum Sum of all LSAs' checksum.
Number of Unknown LSA Number of unknown LSAs.
IPsec policy name IPsec policy used.
SPI SPI defined in the IPsec policy.
display ospfv3 graceful-restart status
Use display ospfv3 graceful-restart status to display GR status of the specified OSPFv3 process.
Syntax
display ospfv3 [ process-id ] graceful-restart status [ | { begin | exclude | include } regular-expression ]
Views
Any view
Default command level
1: Monitor level
Parameters
process-id: Specifies an OSPFv3 process by its ID in the range of 1 to 65535.