R3303-HP HSR6800 Routers Layer 3 - IP Routing Command Reference

344
Field Descri
p
tion
OSPFv3 Process OSPFv3 Process.
Area Area ID.
Instance ID Instance ID.
Router ID Router ID.
Network Type Network type of the interface.
Cost Cost value of the interface.
Transmit Delay Transmission delay of the interface.
State Interface state.
Priority DR priority of the interface.
No designated router on this link No designated router on this link.
No backup designated router on this link No backup designated router on this link.
Timer interval configured
Time intervals in seconds configured on the interface:
• Hello—Hello interval.
• Dead—Dead interval.
• Wait—After this timer expires, the interface quits
from the waiting state.
• Retransmit—LSA retransmission interval.
Hello due in 00:00:02 Hello packet will be sent in 2 seconds.
Neighbor Count Number of Neighbors on the interface.
Adjacent neighbor count Number of Adjacencies on the interface.
IPsec policy name IPsec policy used on the interface.
SPI SPI defined in the IPsec policy.
BFD BFD status on the interface (enabled or disabled).
display ospfv3 lsdb
Use display ospfv3 lsdb to display OSPFv3 LSDB information.
Syntax
display ospfv3 [ process-id ] lsdb [ { external | grace | inter-prefix | inter-router | intra-prefix | link |
network | nssa | router } [ link-state-id ] [ originate-router router-id ] | total ] [ | { begin | exclude |
include } regular-expression ]
Views
Any view
Default command level
1: Monitor level
Parameters
process-id: Specifies an OSPFv3 process by its ID in the range of 1 to 65535.
external: Displays information about AS-external LSAs.