R3303-HP HSR6800 Routers Layer 3 - IP Routing Command Reference

360
display ospfv3 topology
Use display ospfv3 topology to display OSPFv3 topology information.
Syntax
display ospfv3 [ process-id ] topology [ area area-id ] [ | { begin | exclude | include }
regular-expression ]
Views
Any view
Default command level
1: Monitor level
Parameters
process-id: Displays the topology information of an OSPFv3 process. The process ID is in the range of 1
to 65535.
area: Displays the topology information of the specified area.
area-id: Specifies an area by its ID, a decimal integer (in the range of 0 to 4294967295) that is
translated into IPv4 address format by the system or an IPv4 address.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Usage guidelines
If no process is specified, topology information of all OSPFv3 processes is displayed.
Examples
# Display OSPFv3 area 1 topology information.
<Sysname> display ospfv3 topology area 1
OSPFv3 Process (1)
OSPFv3 Area (0.0.0.1) topology
Type ID(If-Index) Bits Metric Next-Hop Interface
Rtr 1.1.1.1 --
Rtr 2.2.2.2 1 2.2.2.2 GE2/1/1
Rtr 3.3.3.3 1 3.3.3.3 GE2/1/1
Rtr 4.4.4.4 1 4.4.4.4 GE2/1/1
Net 4.4.4.4(983049) 1 0.0.0.0 GE2/1/1
Table 84 Command output
Field Descri
p
tion
Type Type of node.
ID(If-Index) Router ID.