R3303-HP HSR6800 Routers Layer 3 - IP Routing Command Reference

362
Table 85 Command output
Field Descri
p
tion
Virtual Link VLINK1 to router 1.1.1.1 is up The virtual link VLINK1 to router 1.1.1.1 is up.
Transit area 0.0.0.1 via interface Serial2/2/0 Interface Serial 2/2/0 in transit area 0.0.0.1.
instance ID Instance ID.
Local address Local IPv6 address.
Remote address Remote IPv6 address.
Transmit Delay Transmit delay of sending LSAs.
State Interface state.
Timer intervals configured, Hello: 10, Dead: 40,
Wait: 40, Retransmit: 5
Timer intervals in seconds:
• Hello—10.
• Dead—40.
• Wait—40.
• Retransmit—5.
Hello due in 00:00:02 Send hello packets in 2 seconds.
Adjacency state Adjacency state.
IPsec policy name IPsec policy used on the virtual link.
SPI SPI defined in the IPsec policy.
enable ipsec-policy (OSPFv3 area view)
Use enable ipsec-policy to apply an IPsec policy in the OSPFv3 area.
Use undo enable ipsec-policy to remove the IPsec policy from the OSPFv3 area.
Syntax
enable ipsec-policy policy-name
undo enable ipsec-policy
Default
No IPsec policy is applied in an area.
Views
OSPFv3 area view
Default command level
2: System level
Parameters
policy-name: IPsec policy name, a string of 1 to 15 characters.
Usage guidelines
The IPsec policy to be applied must have been configured.