R3303-HP HSR6800 Routers Layer 3 - IP Routing Command Reference

385
IPv6 IS-IS configuration commands
IPv6 IS-IS supports all the features of IPv4 IS-IS except that it advertises IPv6 routing information. This
document describes only IPv6 IS-IS exclusive commands. See "IS-IS configuration commands" for other
IS-IS configuration commands.
display isis route ipv6
Use display isis route ipv6 to display IPv6 IS-IS routing information.
Syntax
display isis route ipv6 [ [ level-1 | level-2 ] | verbose ] * [ process-id ] [ | { begin | exclude | include }
regular-expression ]
Views
Any view
Default command level
1: Monitor level
Parameters
level-1: Display Level-1 IPv6 IS-IS routes only.
level-2: Displays Level-2 IPv6 IS-IS routes only.
verbose: Displays detailed IPv6 IS-IS routing information.
process-id: Specifies an IS-IS process by its ID in the range of 1 to 65535.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Usage guidelines
If no level is specified, this command displays both Level-1 and Level-2 routing information.
Examples
# Display IPv6 IS-IS routing information.
<Sysname> display isis route ipv6
Route information for ISIS(1)
-----------------------------
ISIS(1) IPv6 Level-1 Forwarding Table
-------------------------------------