R3303-HP HSR6800 Routers Layer 3 - IP Routing Command Reference

387
Admin Tag : - Src Count : 1
NextHop : Interface : ExitIndex :
FE80::200:5EFF:FE64:8905 GE2/1/1 0x00000003
IPV6 Dest : 2001:2::/64 Cost : 10 Flag : D/L/-
Admin Tag : - Src Count : 2
NextHop : Interface : ExitIndex :
Direct GE2/1/1 0x00000000
Flags: D-Direct, R-Added to RM, L-Advertised in LSPs, U-Up/Down Bit Set
ISIS(1) IPv6 Level-2 Forwarding Table
-------------------------------------
IPV6 Dest : 2001:1::/64 Cost : 20 Flag : -/-/-
Admin Tag : - Src Count : 1
IPV6 Dest : 2001:2::/64 Cost : 10 Flag : D/L/-
Admin Tag : - Src Count : 2
NextHop : Interface : ExitIndex :
Direct GE2/1/1 0x00000000
Flags: D-Direct, R-Added to RM, L-Advertised in LSPs, U-Up/Down Bit Set
Table 87 Command output
Field Descri
p
tion
IPV6 Dest IPv6 destination address and prefix.
Cost Route cost.
Flag/Flags
Routing information status flags:
• D—This is a direct route.
• R—The route has been added into the routing table.
• L—The route has been advertised in an LSP.
• U—Route leaking flag, indicating the Level-1 route is from Level-2. U means the route
will not be returned to Level-2.
Admin Tag Administrative tag.
Src Count Number of advertisement sources.
Next Hop Next hop.
Interface Outbound interface.
ExitIndex Outbound interface index.
ipv6 default-route-advertise
Use ipv6 default-route-advertise to generate a Level-1 or Level-2 IPv6 IS-IS default route.
Use undo ipv6 default-route-advertise to disable generating a default route.