R3303-HP HSR6800 Routers Layer 3 - IP Routing Command Reference

418
Field Description
PrefVal Preferred value.
Ogn
Origin attribute of the route:
• i—The route is interior to the AS. Summary routes and the routes configured using
the network command are considered IGP routes.
• e—The route is learned from the exterior gateway protocol (EGP).
• ?—Short for INCOMPLETE. It indicates that the origin of a route is unknown and
the route is learned by other means. BGP sets Origin attribute of routes learned
from other IGP protocols to INCOMPLETE.
display bgp ipv6 routing-table as-path-acl
Use display bgp ipv6 routing-table as-path-acl to display routes filtered through the specified AS path
ACL.
Syntax
display bgp ipv6 routing-table as-path-acl as-path-acl-number [ | { begin | exclude | include }
regular-expression ]
Views
Any view
Default command level
1: Monitor level
Parameters
as-path-acl-number: Number of an AS path ACL permitted by which to display routing information, in the
range of 1 to 256.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Examples
# Display routes filtered through the AS path ACL 20.
<Sysname> display bgp ipv6 routing-table as-path-acl 20
BGP Local router ID is 30.30.30.1
Status codes: * - valid, ^ - VPNv4 best, > - best, d - damped,
h - history, i - internal, s - suppressed, S - Stale
Origin : i - IGP, e - EGP, ? - incomplete
*> Network : 30:30:: PrefixLen : 64
NextHop : 30:30::30:1 LocPrf :
PrefVal : 0 Label : NULL