R3303-HP HSR6800 Routers Layer 3 - IP Routing Command Reference

432
Syntax
ipv6-family [ vpn-instance vpn-instance-name ]
undo ipv6-family [ vpn-instance vpn-instance-name ]
Views
BGP view
Default command level
2: System level
Parameters
vpn-instance vpn-instance-name: Enters IPv6 BGP-VPN instance view. vpn-instance-name is a string of 1
to 31 case-sensitive characters.
Usage guidelines
Before entering IPv6 BGP-VPN instance view, you must create the VPN instance.
Examples
# Enter IPv6 address family view.
<Sysname> system-view
[Sysname] bgp 100
[Sysname-bgp] ipv6-family
[Sysname-bgp-af-ipv6]
# Enter IPv6 BGP-VPN instance view.
<Sysname> system-view
[Sysname] bgp 100
[Sysname-bgp] ipv6-family vpn-instance vpn1
[Sysname-bgp-ipv6-vpn1]
network (IPv6 address family view/IPv6 BGP-VPN instance
view)
Use network to advertise a network to the IPv6 BGP routing table.
Use undo network to remove an entry from the IPv6 BGP routing table.
Syntax
network ipv6-address prefix-length [ route-policy route-policy-name | short-cut ]
undo network ipv6-address prefix-length [ short-cut ]
Default
No route is advertised.
Views
IPv6 address family view, IPv6 BGP-VPN instance view
Default command level
2: System level