R3303-HP HSR6800 Routers Layer 3 - IP Routing Command Reference

443
Examples
# Specify loopback 0 as the source interface for routing updates to peer 1:2::3:4.
<Sysname> system-view
[Sysname] bgp 100
[Sysname-bgp] ipv6-family
[Sysname-bgp-af-ipv6] peer 1:2::3:4 connect-interface loopback 0
peer default-route-advertise
Use peer default-route-advertise to advertise a default route to a peer/peer group.
Use undo peer default-route-advertise to disable advertising a default route.
Syntax
peer { group-name | ipv4-address | ipv6-address } default-route-advertise [ route-policy
route-policy-name ]
undo peer { group-name | ipv4-address | ipv6-address } default-route-advertise
Default
No default route is advertised to a peer/peer group.
Views
IPv6 address family view
Default command level
2: System level
Parameters
group-name: Name of an IPv4 or IPv6 peer group, a string of 1 to 47 characters.
ipv4-address: IPv4 address of a peer.
ipv6-address: IPv6 address of a peer.
route-policy-name: Name of a routing policy, a string of 1 to 63 characters.
Usage guidelines
Using this command does not require availability of the default route in the routing table. With this
command used, the router sends the default route unconditionally to the peer/peer group with the next
hop being itself.
Examples
# Advertise a default route to peer 1:2::3:4.
<Sysname> system-view
[Sysname] bgp 100
[Sysname-bgp] ipv6-family
[Sysname-bgp-af-ipv6] peer 1:2::3:4 default-route-advertise
peer description (IPv6 address family view)
Use peer description to configure the description information for a peer/peer group.
Use undo peer description to remove the description information for a peer/peer group.