R3303-HP HSR6800 Routers Layer 3 - IP Routing Command Reference

476
of the specified card. If the apply output-interface clause or the apply default output-interface clause is
configured, the clause is displayed only when the link of the output interface is up. (In standalone mode.)
If no chassis number or slot number is specified, this command displays the IPv6 PBR policy information
on the active MPU of the master device, as long as the policies are defined. If a chassis number and a
slot number are specified, this command displays the IPv6 PBR policy information on the specified card,
as long as the policies are applied to the system or an interface of the specified card. If the apply
output-interface clause or the apply default output-interface clause is configured, the clause is displayed
only when the link of the output interface is up. (In IRF mode.)
Examples
# Display all IPv6 policy information.
<Sysname> display ipv6 config policy-based-route
IPv6 Policy based routing configuration information:
policy-based-route : abc
Node 1 permit :
apply output-interface
Serial2/2/0
Table 103 Command output
Field Description
IPv6 Policy based routing configuration information IPv6 policy information.
policy-based-route Name of the referenced policy.
Node 1 permit : The match mode of Node 1 is permit.
apply output-interface Output interface specified for matched packets.
display ipv6 policy-based-route
Use display ipv6 policy-based-route to display IPv6 PBR policy information.
Syntax
display ipv6 policy-based-route [ | { begin | exclude | include } regular-expression ]
Views
Any view
Default command level
1: Monitor level
Parameters
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.