R3303-HP HSR6800 Routers Layer 3 - IP Routing Command Reference

480
Field Description
permit node The match mode of the node is permit.
if-match acl6 Match IPv6 packets against IPv6 ACL.
apply output-interface Output interface specified for matching packets.
matched Matching packets on the node.
Total matched Total matching packets on all nodes.
if-match acl6
Use if-match acl6 to configure an ACL match criterion.
Use undo if-match acl6 to remove the ACL match criterion.
Syntax
if-match acl6 acl6-number
undo if-match acl6
Views
IPv6 policy node view
Default command level
2: System level
Parameters
acl6-number: Specifies the IPv6 ACL number in the range of 2000 to 3999. The number of a basic IPv6
ACL is in the range of 2000 to 2999 and the number of an advanced IPv6 ACL is in the range of 3000
to 3999.
Examples
# Permit the packets matching ACL 2000.
<Sysname> system-view
[Sysname] ipv6 policy-based-route aa permit node 10
[Sysname-pbr6-aa-10] if-match acl6 2000
if-match packet-length
Use if-match packet-length to define a packet length match criterion.
Use undo if-match packet-length to remove the match criterion.
Syntax
if-match packet-length min-len max-len
undo if-match packet-length
Views
IPv6 policy node view