R3303-HP HSR6800 Routers Layer 3 - IP Routing Command Reference

483
node node-number: Specifies the number of the IPv6 policy node, in the range of 0 to 65535. Packets are
matched against the node with a smaller node-number first.
Examples
# Create permit-mode of Node 10 for IPv6 policy aaa, and enter IPv6 policy node view.
<Sysname> system-view
[Sysname] ipv6 policy-based-route aaa permit node 10
[Sysname-pbr6-aaa-10]
reset ipv6 policy-based-route statistics
Use reset ipv6 policy-based-route statistics to clear IPv6 PBR statistics.
Syntax
reset ipv6 policy-based-route statistics [ policy-name ]
Views
User view
Default command level
1: Monitor level
Parameters
policy-name: Specifies a policy name, a string of 1 to 19 characters.
Usage guidelines
If no policy is specified, this command clears all IPv6 PBR statistics.
Examples
# Clear all IPv6 PBR statistics.
<Sysname> reset ipv6 policy-based-route statistics