R3303-HP HSR6800 Routers Layer 3 - IP Routing Command Reference

503

Default

No match criterion is configured.

Views

Routing policy view

Default command level

2: System level

Parameters

external-type1: Matches OSPF Type 1 external routes.

external-type1or2: Matches OSPF Type 1 or 2 external routes.

external-type2: Matches OSPF Type 2 external routes.

internal: Matches internal routes (OSPF intra-area and inter-area routes).

is-is-level-1: Matches IS-IS Level-1 routes.

is-is-level-2: Matches IS-IS Level-2 routes.

nssa-external-type1: Matches OSPF NSSA Type 1 external routes.

nssa-external-type1or2: Matches OSPF NSSA Type 1 or 2 external routes.

nssa-external-type2: Matches OSPF NSSA Type 2 external routes.

Examples

# Configure node 10 in permit mode of routing policy policy1 to match OSPF internal routes.

<Sysname> system-view

[Sysname] route-policy policy1 permit node 10

[Sysname-route-policy] if-match route-type internal

if-match tag

Use if-match tag to match routing information having the specified tag.

Use undo if-match tag to remove the match criterion.

Syntax

if-match tag value

undo if-match tag