R3303-HP HSR6800 Routers Layer 3 - IP Routing Command Reference

38
MetricOut:5 MetricOut route policy:234
Split-horizon/Poison-reverse:on/off Input/Output:on/on
Default route:off
Current packets number/Maximum packets number:234/2000
Table 9 Command output
Field Description
Interface-name Name of an interface running RIP.
Address/Mask IP address and mask of the interface.
Version RIP version running on the interface.
MetricIn
Additional routing metric added to the incoming
routes.
MetricIn route policy
Name of the routing policy used to add the additional
routing metric for the incoming routes. If no routing
policy is referenced, the field displays Not
designated.
MetricOut
Additional routing metric added to the outgoing
routes.
MetricOut route policy
Name of the routing policy used to add the additional
routing metric for the outgoing routes. If no routing
policy is referenced, the field displays Not
designated.
Split-horizon
Indicates whether split-horizon is enabled:
on—Enabled.
off—Disabled.
Poison-reverse
Indicates whether poison-reverse is enabled:
on—Enabled.
off—Disabled.
Input/Output
Indicates if the interface is allowed to receive (Input) or
send (Output) RIP messages:
on—Allowed.
off—Not allowed.
Default route
Indicates whether sending the default route to RIP
neighbors is allowed:
on—Allowed.
off—Not allowed.
Current packets number/Maximum packets number
Packets to be sent/Maximum packets that can be sent
on the interface.
display rip route
Use display rip route to display the routing information of a specified RIP process.