R3303-HP HSR6800 Routers Layer 3 - IP Routing Command Reference

518
MTR configuration commands
acl
Use acl to specify an ACL for the topology.
Use undo acl to remove the configuration.
Syntax
acl acl-number
undo acl
Views
Topology view
Default command level
2: System level
Parameters
acl-number: Specifies an ACL by its number in the range of 3000 to 3999.
Examples
# Specify ACL 3001 for topology voice.
<Sysname> system-view
[Sysname] address-family ipv4
[Sysname-address-family ipv4] multiple-topology voice
[Sysname-multiple-topology-voice] acl 3001
address-family ipv4
Use address-family ipv4 to enter IPv4 address family view.
Use undo address-family ipv4 to remove all configurations in the IPv4 address family view.
Syntax
address-family ipv4
undo address-family ipv4
Views
System view
Default command level
2: System level
Usage guidelines
If you execute the address-family ipv4 command when the IPv4 address family is being deleted, the
configuration will fail.