R3303-HP HSR6800 Routers Layer 3 - IP Routing Command Reference

519
Examples
# Enter IPv4 address family view.
<Sysname> system-view
[Sysname] address-family ipv4
[Sysname-address-family ipv4]
# Enter IPv4 address family view when the address family is being deleted.
<Sysname> system-view
[Sysname] address-family ipv4
The global IPv4 address family is being deleted. Please try later.
display multiple-topology
Use display multiple-topology to display the information of the specified topology.
Syntax
display multiple-topology [ topology-name ] [ | { begin | exclude | include } regular-expression ]
Views
Any view
Default command level
1: Monitor level
Parameters
topology-name: Specifies a topology by its name, a case-sensitive string of 1 to 31 characters.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Usage guidelines
If no topology is specified, this command displays the summary information of all topologies.
Examples
# Display the summary information of all topologies.
<Sysname> display multiple-topology
Total multiple-topology configured : 2
Multiple-topology Name Address Familiy Create Time
1 ipv4 2010/07/05 10:22:18
11 ipv4 2010/07/05 10:22:25
Table 111 Command output
Field Descri
p
tion
Total multiple-topology configured Number of topologies.
Multiple-topology Name Topology name.