R3303-HP HSR6800 Routers Layer 3 - IP Routing Command Reference

520
Field Descri
p
tion
Address Familiy Address family.
Create Time Time when the topology was created.
multiple-topology
Use multiple-topology to create a topology and enter topology view.
Use undo multiple-topology to remove the specified topology.
Syntax
multiple-topology topology-name
undo multiple-topology topology-name
Default
No topology is created.
Views
IPv4 address family view
Default command level
2: System level
Parameters
topology-name: Topology name, a case-sensitive string of 1 to 31 characters.
Usage guidelines
If you execute the multiple-topology command when an existing topology with the same name is being
removed, the configuration will fail.
Examples
# Create topology voice and enter its view.
<Sysname> system-view
[Sysname] address-family ipv4
[Sysname-address-family ipv4] multiple-topology voice
[Sysname-multiple-topology-voice]
# Create topology voice and enter its view when an existing topology named voice is being removed.
<Sysname> system-view
[Sysname] address-family ipv4
[Sysname-address-family ipv4] multiple-topology voice
The topology is being deleted. Please try later.