R3303-HP HSR6800 Routers Layer 3 - IP Routing Command Reference

44
[Sysname-acl-adv-3000] quit
[Sysname] rip 1
[Sysname-rip-1] filter-policy 3000 import
Related commands
• acl (ACL and QoS Command Reference)
• ip ip-prefix
host-route
Use host-route to enable host route reception.
Use undo host-route to disable host route reception.
Syntax
host-route
undo host-route
Default
Receiving host routes is enabled.
Views
RIP view
Default command level
2: System level
Usage guidelines
In some cases, a router might receive many host routes from the same network segment. These routes are
not helpful for routing and occupy a large amount of network resources. Use undo host-route to disable
receiving of host routes.
RIPv2 can be disabled from receiving host routes, but RIPv1 cannot.
Examples
# Disable RIP from receiving host routes.
<Sysname> system-view
[Sysname] rip 1
[Sysname-rip-1] undo host-route
import-route (RIP view)
Use import-route to enable route redistribution from another routing protocol.
Use undo import-route to disable route redistribution.
Syntax
import-route protocol [ process-id | all-processes | allow-ibgp ] [ cost cost | route-policy
route-policy-name | tag tag ] *
undo import-route protocol [ process-id | all-processes ]