R3303-HP HSR6800 Routers Layer 3 - IP Routing Command Reference

49
• If no preference is set by the routing policy, the preference of all RIP routes is set by the preference
command.
Examples
# Set the RIP route preference to 120.
<Sysname> system-view
[Sysname] rip 1
[Sysname-rip-1] preference 120
reset rip process
Use reset rip process to reset the specified RIP process.
Syntax
reset rip process-id process
Views
User view
Default command level
1: Monitor level
Parameters
process-id: Specifies a RIP process by its ID in the range of 1 to 65535.
Usage guidelines
After you execute the command, the system prompts you to confirm a reset of the RIP process.
Examples
# Reset RIP process 100.
<Sysname> reset rip 100 process
Warning : Reset RIP process? [Y/N]:y
reset rip statistics
Use reset rip statistics to clear the statistics of the specified RIP process. This command can clear the
statistics of debugging.
Syntax
reset rip process-id statistics
Views
User view
Default command level
2: System level
Parameters
process-id: Specifies a RIP process by its ID in the range of 1 to 65535.
Examples
# Clear statistics in RIP process 100.