R3303-HP HSR6800 Routers Layer 3 - IP Routing Command Reference

76
Timers: Hello 10 , Dead 40 , Poll 40 , Retransmit 5 , Transmit Delay 1
Table 14 Command output
Field Descri
p
tion
OSPF Process 1 with Router ID 192.168.1.2 OSPF process ID and OSPF router ID.
RouterID Router ID.
Router Type
Router type:
• ABR.
• ASBR.
• NSSA.
• Null.
Route Tag Tag of redistributed routes.
Multi-VPN-Instance is not enabled The OSPF process does not support multi-VPN-instance.
Applications Supported
Applications supported.
MPLS Traffic-Engineering means MPLS TE is supported.
SPF-schedule-interval Interval for SPF calculations.
LSA generation interval LSA generation interval.
LSA arrival interval LSA arrival interval.
Transmit pacing
LSU packet transmit rate of the interface:
• Interval—LSU transmit interval of the interface.
• Count—Maximum number of LSU packets sent at
each interval.
Default ASE Parameter Default ASE Parameters: metric, tag, and route type.
Route Preference Internal route priority.
ASE Route Preference External route priority.
SPF Computation count SPF computation count of the OSPF process.
RFC1583 Compatible Compatible with routing rules defined in RFC 1583.
Area Count Area number of the current process.
Nssa Area Count NSSA area number of the current process.
7/5 translator state
State of the translator that translates Type-7 LSAs to Type-5
LSAs. The value can be one of the following:
• Enabled—The translator is specified through
commands.
• Elected—The translator is designated through
election.
• Disabled—The device is not a translator that translates
Type-7 LSAs to Type-5 LSAs.
7/5 translate stability timer interval Stability interval for Type-7 LSA-to-Type-5 LSA translation.
ExChange/Loading Neighbors Neighbors in ExChange/Loading state.
Area Area ID in the IP address format.