R3303-HP HSR6800 Routers Layer 3 - IP Routing Command Reference

77
Field Descri
p
tion
Authtype
Authentication type of the area:
• None—No authentication.
• Simple—Simple authentication.
• MD5—MD5 authentication.
Area flag Type of the area.
SPF scheduled Count SPF calculation count in the OSPF area.
Interface Interface in the area.
Cost Interface cost.
State Interface state.
Type Interface network type.
MTU Interface MTU.
Priority Router priority.
Timers Timers: Hello, dead, poll, retransmit, and transmit delay.
display ospf cumulative
Use display ospf cumulative to display OSPF statistics.
Syntax
display ospf [ process-id ] cumulative [ | { begin | exclude | include } regular-expression ]
Views
Any view
Default command level
1: Monitor level
Parameters
process-id: Specifies an OSPF process by its ID in the range of 1 to 65535.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Usage guidelines
Use of this command is helpful for troubleshooting.
Examples
# Display OSPF statistics.
<Sysname> display ospf cumulative
OSPF Process 1 with Router ID 2.2.2.2