R3303-HP HSR6800 Routers Layer 3 - IP Routing Command Reference

81
Field Descri
p
tion
LS ACK: Unknown LSA type LSAck packets with unknown LSA type.
LS REQ: Empty request LSR packets with no request information.
LS REQ: Bad request Bad LSR packets.
LS UPD: LSA checksum bad LSU packets with wrong LSA checksum.
LS UPD: Received less recent LSA LSU packets without the most recent LSA.
LS UPD: Unknown LSA type LSU packets with unknown LSA type.
display ospf interface
Use display ospf interface to display OSPF interface information.
Syntax
display ospf [ process-id ] interface [ interface-type interface-number | all ] [ | { begin | exclude |
include } regular-expression ]
Views
Any view
Default command level
1: Monitor level
Parameters
process-id: Specifies an OSPF process by its ID in the range of 1 to 65535.
interface-type interface-number: Specifies an interface by its type and number.
all: Displays the OSPF information of all interfaces.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Usage guidelines
If no OSPF process is specified, the OSPF interface information of all OSPF processes is displayed.
Examples
# Display OSPF interface information.
<Sysname> display ospf interface
OSPF Process 1 with Router ID 192.168.1.1
Interfaces
Area: 0.0.0.0
IP Address Type State Cost Pri DR BDR