R3303-HP HSR6800 Routers Layer 3 - IP Routing Command Reference

83
Field Descri
p
tion
Max Cost
Interval that OSPF advertises the maximum cost in LSAs, in seconds.
If infinite is displayed for this field, OSPF advertises the maximum cost in LSAs until
the LDP session converges.
LDP-sync State
State of LDP and OSPF synchronization:
• Achieved—LDP and OSPF has synchronized.
• Hold Down—The interface waits for the LDP session convergence rather
than establishing neighbor relationship.
• Max Cost—OSPF advertises the maximum cost in LSAs.
• Init—Original state.
display ospf lsdb
Use display ospf lsdb to display LSDB information.
Syntax
display ospf [ process-id ] lsdb [ brief | [ { asbr | ase | network | nssa | opaque-area | opaque-as |
opaque-link | router | summary } [ link-state-id ] ] [ originate-router advertising-router-id |
self-originate ] ] [ | { begin | exclude | include } regular-expression ]
Views
Any view
Default command level
1: Monitor level
Parameters
process-id: Specifies an OSPF process by its ID in the range of 1 to 65535.
brief: Displays brief LSDB information.
asbr: Displays Type-4 LSA (ASBR Summary LSA) information in the LSDB.
ase: Displays Type-5 LSA (AS External LSA) information in the LSDB.
network: Displays Type-2 LSA (Network LSA) information in the LSDB.
nssa: Displays Type-7 LSA (NSSA External LSA) information in the LSDB.
opaque-area: Displays Type-10 LSA (Opaque-area LSA) information in the LSDB.
opaque-as: Displays Type-11 LSA (Opaque-AS LSA) information in the LSDB.
opaque-link: Displays Type-9 LSA (Opaque-link LSA) information in the LSDB.
router: Displays Type-1 LSA (Router LSA) information in the LSDB.
summary: Displays Type-3 LSA (Network Summary LSA) information in the LSDB.
link-state-id: Link state ID, in the IP address format.
originate-router advertising-router-id: Specifies an advertising router by its ID.
self-originate: Displays information about self-originated LSAs.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.