R3303-HP HSR6800 Routers Layer 3 - IP Routing Configuration Guide

93
Task Command Remarks
Display OSPF retransmission
queue information.
display ospf [ process-id ] retrans-queue
[ interface-type interface-number ] [ neighbor-id ]
[ | { begin | exclude | include }
regular-expression ]
Available in any
view.
Display OSPF ABR and ASBR
information.
display ospf [ process-id ] abr-asbr [ | { begin |
exclude | include } regular-expression ]
Available in any
view.
Display OSPF interface
information.
display ospf [ process-id ] interface [ all |
interface-type interface-number ] [ | { begin |
exclude | include } regular-expression ]
Available in any
view.
Display OSPF error information.
display ospf [ process-id ] error [ | { begin |
exclude | include } regular-expression ]
Available in any
view.
Display OSPF ASBR
summarization information.
display ospf [ process-id ] asbr-summary
[ ip-address { mask | mask-length } ] [ | { begin |
exclude | include } regular-expression ]
Available in any
view.
Display the global router ID.
display router id [ | { begin | exclude | include }
regular-expression ]
Available in any
view.
Clear OSPF statistics.
reset ospf [ process-id ] counters [ neighbor
[ interface-type interface-number ] [ router-id ] ]
Available in user
view.
Reset an OSPF process. reset ospf [ process-id ] process [ graceful-restart ]
Available in user
view.
Support for this
command depends
on the device
model.
Re-enable OSPF route
redistribution.
reset ospf [ process-id ] redistribution
Available in user
view.
OSPF configuration examples
These configuration examples only cover OSPF configuration related commands.
Configuring OSPF basic functions
Network requirements
• Enable OSPF on all routers, and split the AS into three areas.
• Configure Router A and Router B as ABRs.