R3303-HP HSR6800 Routers Layer 3 - IP Routing Configuration Guide

120
Figure 33 Network diagram
Device Interface IP address Device Interface IP address
Router A GE2/1
/
1 192.168.0.102/24 Router B GE2/1
/
1 192.168.0.100/24
GE2/1
/
2 10.1.1.102/24 GE2/1
/
2 13.1.1.1/24
Router C GE2/1/1 10.1.1.100/24
GE2/1
/
2 13.1.1.2/24
Configuration procedure
1. Configure IP addresses for the interfaces. (Details not shown.)
2. Configure OSPF basic functions:
# Configure Router A.
<RouterA> system-view
[RouterA] ospf
[RouterA-ospf-1] area 0
[RouterA-ospf-1-area-0.0.0.0] network 192.168.0.0 0.0.0.255
[RouterA-ospf-1-area-0.0.0.0] network 10.1.1.0 0.0.0.255
[RouterA-ospf-1-area-0.0.0.0] network 121.1.1.0 0.0.0.255
[RouterA-ospf-1-area-0.0.0.0] quit
[RouterA-ospf-1] quit
[RouterA] interface GigabitEthernet 2//2
[RouterA-GigabitEthernet2/1/2] ospf cost 2
# Configure Router B.
<RouterB> system-view
[RouterB] ospf
[RouterB-ospf-1] area 0
[RouterB-ospf-1-area-0.0.0.0] network 192.168.0.0 0.0.0.255
[RouterB-ospf-1-area-0.0.0.0] network 13.1.1.0 0.0.0.255
[RouterB-ospf-1-area-0.0.0.0] network 120.1.1.0 0.0.0.255
[RouterB-ospf-1-area-0.0.0.0] quit
[RouterB-ospf-1] quit
[RouterB] interface GigabitEthernet 2/1/2
[RouterB-GigabitEthernet2/1/2] ospf cost 2
# Configure Router C.
<RouterC> system-view
[RouterC] ospf