R3303-HP HSR6800 Routers Layer 3 - IP Routing Configuration Guide

132
• Holding time—If no hello packets are received from the neighbor within the holding time, the
neighbor is considered down.
• PDU length—Total length of the PDU in bytes.
• Priority—DIS priority.
• LAN ID—Includes the system ID and a one-byte pseudonode ID.
Figure 41 sho
ws the hello packet format on the point-to-point networks.
Figure 41 P2P IIH format
Instead of the priority and LAN ID fields in the LAN IIH, the P2P IIH has a Local Circuit ID field.
LSP
The Link State PDUs (LSPs) carry link state information. LSPs include Level-1 LSPs and Level-2 LSP. The
Level-2 LSPs are sent by the Level-2 routers, and the Level-1 LSPs are sent by the Level-1 routers. The Level-1-2
router can send both types of LSPs.
The two types of LSPs have the same format, as shown in Figure 42.