R3303-HP HSR6800 Routers Layer 3 - IP Routing Configuration Guide

162
Ste
p
Command Remarks
7. Enable an IS-IS IPv4
unicast topology on
the interface.
isis multiple-topology ipv4-unicast
topology-name
Not enabled default.
Displaying and maintaining IS-IS
Task Command Remarks
Display brief IS-IS configuration
information.
display isis brief [ process-id | vpn-instance
vpn-instance-name ] [ | { begin | exclude |
include } regular-expression ]
Available in any
view.
Display the status of IS-IS debug
switches.
display isis debug-switches { process-id |
vpn-instance vpn-instance-name } [ | { begin |
exclude | include } regular-expression ]
Available in any
view.
Display the IS-IS GR state.
display isis graceful-restart status [ level-1 |
level-2 ] [ process-id | vpn-instance
vpn-instance-name ] [ | { begin | exclude |
include } regular-expression ]
Available in any
view.
Display information about IS-IS
enabled interfaces.
display isis interface [ statistics | [ interface-type
interface-number ] [ verbose ] ] [ process-id |
vpn-instance vpn-instance-name ] [ | { begin |
exclude | include } regular-expression ]
Available in any
view.
Display IS-IS LSDB information.
display isis lsdb [ [ l1 | l2 | level-1 | level-2 ] |
[ lsp-id lspid | lsp-name lspname ] | local |
verbose ] * [ process-id | vpn-instance
vpn-instance-name ] [ | { begin | exclude |
include } regular-expression ]
Available in any
view.
Display IS-IS mesh group
information.
display isis mesh-group [ process-id | vpn-instance
vpn-instance-name ] [ | { begin | exclude |
include } regular-expression ]
Available in any
view.
Display the host-name-to-system-ID
mapping table.
display isis name-table [ process-id | vpn-instance
vpn-instance-name ] [ | { begin | exclude |
include } regular-expression ]
Available in any
view.
Display IS-IS neighbor information.
display isis peer [ statistics | verbose ] [ process-id
| vpn-instance vpn-instance-name ] [ | { begin |
exclude | include } regular-expression ]
Available in any
view.
Display IS-IS IPv4 routing
information.
display isis route [ ipv4 ] [ [ level-1 | level-2 ] |
verbose ] * [ process-id [ ipv4-unicast
topology-name ] | vpn-instance
vpn-instance-name ] [ | { begin | exclude |
include } regular-expression ]
Available in any
view.
Display IS-IS SPF calculation log
information.
display isis spf-log [ process-id | vpn-instance
vpn-instance-name ] [ | { begin | exclude |
include } regular-expression ]
Available in any
view.