R3303-HP HSR6800 Routers Layer 3 - IP Routing Configuration Guide

208
To configure an EBGP peer group by using Method 1:
Ste
p
Command Remarks
1. Enter system view.
system-view N/A
2. Enter BGP view or BGP-VPN
instance view.
• Enter BGP view:
bgp as-number
• Enter BGP-VPN instance view:
a. bgp as-number
b. ipv4-family vpn-instance
vpn-instance-name
Use either method.
3. Create an EBGP peer group.
group group-name external
By default, no EBGP peer group is
created.
4. Specify the AS number for the
group.
peer group-name as-number
as-number
By default, no AS number is
specified.
5. Add a peer into the EBGP
peer group.
peer ip-address group group-name
[ as-number as-number ]
By default, no peer exists in the
peer group.
The as-number as-number option,
if used, must specify the same AS
number as the peer group-name
as-number as-number command.
6. Enable a peer.
peer ip-address enable
Optional.
Enabled by default.
7. Configure a description for a
peer group.
peer group-name description
description-text
Optional.
By default, no description is
configured for the peer group.
To configure an EBGP peer group by using Method 2:
Ste
p
Command Remarks
1. Enter system view.
system-view N/A
2. Enter BGP view or BGP-VPN
instance view.
• Enter BGP view:
bgp as-number
• Enter BGP-VPN instance view:
a. bgp as-number
b. ipv4-family vpn-instance
vpn-instance-name
Use either method.
3. Create an EBGP peer group
group group-name external N/A
4. Create a BGP peer and
specify its AS number.
peer ip-address as-number
as-number
N/A
5. Add a peer into the EBGP
peer group.
peer ip-address group group-name
[ as-number as-number ]
The as-number as-number option,
if used, must specify the same AS
number as the peer ip-address
as-number as-number command.