R3303-HP HSR6800 Routers Layer 3 - IP Routing Configuration Guide

10
Configuration procedure
To configure static route FRR:
Ste
p
Command Remarks
1. Enter system view.
system-view N/A
2. Configure the source address
of BFD echo packets.
bfd echo-source-ip ip-address
Not configured by default.
For more information about this
command, see High Availability
Command Reference.
3. Configure static route FRR.
ip route-static [ vpn-instance
vpn-instance-name ] fast-reroute
route-policy route-policy-name
Not configured by default.
Displaying and maintaining static routes
Task Command Remarks
Display information of static
routes.
display ip routing-table protocol static [ inactive |
verbose ] [ | { begin | exclude | include }
regular-expression ]
Available in any
view.
For more information about this command, see Layer 3—IP Routing Command Reference.
Static route configuration examples
Basic static route configuration example
Network requirements
Configure static routes in Figure 2 for interconnections between any two hosts.