R3303-HP HSR6800 Routers Layer 3 - IP Routing Configuration Guide

227
Step Command Remarks
3. Replace the AS number of a
peer or peer group in the
AS_PATH attribute as the local
AS number.
peer { group-name | ip-address }
substitute-as
Not configured by default.
Removing private AS numbers from updates to a peer or peer group
Private AS numbers are typically used in test networks, and need not be transmitted in public networks.
The range of private AS numbers is from 64512 to 65535.
To remove private AS numbers from updates to a peer or peer group:
Step Command Remarks
1. Enter system view.
system-view N/A
2. Enter BGP view or BGP-VPN
instance view.
• Enter BGP view:
bgp as-number
• Enter BGP-VPN instance view:
a. bgp as-number
b. ipv4-family vpn-instance
vpn-instance-name
Use either method.
3. Configure BGP to remove
private AS numbers from the
AS_PATH attribute of updates
to a peer or peer group.
peer { group-name | ip-address }
public-as-only
By default, BGP updates carry
private AS numbers.
Ignoring the first AS number of EBGP route updates
Typically, BGP checks the AS_PATH attribute of a route update received from a peer. If the first AS number
is not that of the BGP peer, the BGP router discards the route update.
For some network applications, a BGP router does not add its own AS number to the AS_PATH attribute.
In this case, you must configure the ignore-first-as command on the EBGP peer to ignore the first AS
number of EBGP route updates.
To ignore the first AS number of EBGP route updates:
Step Command Remarks
1. Enter system view.
system-view N/A
2. Enter BGP view or BGP-VPN
instance view.
bgp as-number N/A
3. Configure BGP to ignore the
first AS number of EBGP route
updates.
ignore-first-as
By default, BGP checks the first AS
number of EBGP route updates.