R3303-HP HSR6800 Routers Layer 3 - IP Routing Configuration Guide

250
<RouterA> system-view
[RouterA] bgp 65008
[RouterA-bgp] router-id 1.1.1.1
[RouterA-bgp] peer 3.1.1.1 as-number 65009
[RouterA-bgp] network 8.1.1.0 24
[RouterA-bgp] quit
# Configure Router B.
[RouterB] bgp 65009
[RouterB-bgp] router-id 2.2.2.2
[RouterB-bgp] peer 3.1.1.2 as-number 65008
4. Configure BGP and IGP synchronization:
{ Configure BGP to redistribute routes from OSPF on Router B, so Router A can obtain the route to
9.1.2.0/24.
{ Configure OSPF to redistribute routes from BGP on Router B, so that Router C can obtain the
ro u t e t o 8 .1.1.0 / 24 .
# Configure BGP to redistribute routes from OSPF on Router B.
[RouterB-bgp] import-route ospf 1
[RouterB-bgp] quit
[RouterB] ospf 1
[RouterB-ospf-1] import-route bgp
[RouterB-ospf-1] quit
# Display the BGP routing table on Router A.
[RouterA] display bgp routing-table
Total Number of Routes: 3
BGP Local router ID is 1.1.1.1
Status codes: * - valid, ^ - VPNv4 best, > - best, d - damped,
h - history, i - internal, s - suppressed, S - Stale
Origin : i - IGP, e - EGP, ? - incomplete
Network NextHop MED LocPrf PrefVal Path/Ogn
*> 3.3.3.3/32 3.1.1.1 1 0 65009?
*> 8.1.1.0/24 0.0.0.0 0 0 i
*> 9.1.2.0/24 3.1.1.1 1 0 65009?
# Display the routing table on Router C.
[RouterC] display ip routing-table
Routing Tables: Public
Destinations : 9 Routes : 9
Destination/Mask Proto Pre Cost NextHop Interface
2.2.2.2/32 OSPF 10 1 9.1.1.1 S2/2/0
3.3.3.3/32 Direct 0 0 127.0.0.1 InLoop0
8.1.1.0/24 O_ASE 150 1 9.1.1.1 S2/2/0
9.1.1.0/24 Direct 0 0 9.1.1.2 S2/2/0